Ai SolventVap 10L series rotary evaporators is now ETL tested to UL/CSA standards. This certification is required by many municipalities, and it also provides a higher standard of equipment safety and lifespan. SolventVap comes with all PTFE valves for solvent-resistant operations. We also lowered the height of assembled unit, for easy installation and ease of use and storage. Also come with them are vertical glassware and digital temperature/rotation control. Its optimized bath volume allows for rapid heat-up times. The condenser unit has specially designed glass tubes that utilize surface area extremely efficiently. That’s why our SolventVap evaporators consistently deliver reliable and reproducible process results that are usually reserved for more costly systems. Another important aspect of the SolventVap is the safety features, which includes dry-run protection, water bath over-temperature shut-off protection, and fuse protection.

Rotary evaporator features a specially designed motor and worm gear, which provides constant rotation at speeds from 10 to 130 rpm. As the flask containing the solvent is rotated, it continually transfers a thin layer of liquid over the entire inner surface. This gives a very large surface area for evaporation, which is caused by the gentle heating from the water bath. The rotating system is fitted with a special seal that allows the apparatus to be placed under vacuum, effectively reducing the boiling point of the solvents and removing the vapor phase, making the process much more efficient. Each unit is also equipped with an easy-to-use vacuum release and a continuous feed system, which allows solvent to be constantly drawn into the rotating flask without needing to stop the operation.

Digital water bath operates from ambient temperature to 99°C (210°F) with PID temperature control stepping at 0.1°C increments. Heating coils are located directly inside the pan for the most efficient heating possible. A built-in overheat protector will shut down power, should the controller fail.

Standard Glassware Set includes 2.6 gallon (10 liters) round-bottomed evaporating flask, 1.3 gallon (5 liters) round-bottomed receiving flask, and vertical condenser. Rotary evaporators with vertical glass condenser are great for distillation of solvents with higher boiling points.

Features

UL 61010-1 and CSA C22.2 certified, standard. CE certification optional.
Water bath cover enhances safety by protecting evaporating flask and the material inside; it gives you uniform temperature inside evaporation flask as well as energy saving by reducing heat loss. It also creates a better lab environment by preventing heat and humidity from escaping.
New stronger swivel casters can be securely adjusted to accommodate uneven floor.
Solvent-resistant PTFE and Viton gaskets, ensuring long time operation.
Specialized motor with extremely compact, intermeshed worm and worm gear provides precise driving for very quiet, vibration-free operation.
Downward-condensing vacuum connection design ensures safe vacuum operation.
Motorized water bath lifting for precise control.
Easy, straight-forward visual operation with digital speed and temperature display.
PID temperature controller ensures accurate temperature control is maintained.
One year warranty on rotary evaporator except for glassware and all sealing gaskets.

Specifications

Electrical requirements	220V 50/60Hz single phase, 22A, 4800 watt (rotation motor: 250 watts)
Evaporating flask	Capacity: 2.6 gallon (10 liters or 0.35 cu ft) Maximum load: Not to exceed 60% of the flask's capacity Sealing flange: 3.7" diameter Rotation speed: 10 to 130 rpm Evaporating speed: 0.85 gallon/hour (water), 1.7 gallon/hour (alcohol)
Receiving flask	1.3 gallon (5 liters or 0.18 cu ft)
Condenser	Glassware: Main + auxiliary triple-circulating cold traps, vertical Chilling fluid conneciton: 3/8" hose barb x 4 (2 on main + 2 on auxiliary)
Working environment	5 to 95°F
Water bath	Temperature range: ambient to 99°C (210°F) Temperature controller: digital Dimensions: 13.8" diameter x 8.7" depth x 11" height Material: stainless steel Media: water Number of heaters: two Drain port: one Exterior liner: rubber Lifting: motorized Maximum lifting distance: 4 inches
Vacuum	Vacuum level: < 3 torrs Vacuum sealing: PTFE + Vinton gaskets Vacuum connection: 3/8" hose barb x 1 on main condenser
Swivel casters	Four, built-in with locks
Safety	Dry-run, over-temp shut-off, built-in circuit breakers
Shipping weight	200 Lb (evaporator), 100 Lb (glassware)
Unit dimensions	36 x 22 x 67" (WxDxH)
Shipping dimensions	39 x 22 x 44" (evaporator), 30 x 25 x 28" (glassware) (WxDxH)

Standard package

Part description	Quantity	Part image
Ai SolventVap 2.6-gallon rotary evaporator and water bath	1 set
Vertical main and auxiliary condensers, glass	2 pcs
2.6G/10L round shaped rotating evaporating flask, glass	1 pc
1.3G/5L round shaped receiving flask with 2 vacuum ports, 1 drain port and PTFE open/close valve	1 pc
Three-way tee flask, glass	1 pc
Center glass tube and oring (pre-installed)	1 set
PTFE vacuum sealing kit (pre-installed)	2 pcs
Receiving flask glass vacuum port with PTFE open/close valve	2 sets
Glass material feeding port with PTFE open/close valve	1 set
PTFE extension feeding hose	1 pc
Stainless steel pole	1 pc
Mechanical vacuum gauge with 3 hose barb connectors	1 pc
Rubber-wrapped condenser support and bracket	2 pcs
Rubber-wrapped receiving flask support	1 pc
Aluminum flanges with PTFE seal	6 sets
PTFE centering ring for sealing flanges	6 pcs
Chilling fluid connector x 4, vacuum connector x 1	5 sets
Evaporating flask cap tightening tool	1 pc
Allen key and inner hex screws	5 pcs
User's manual	1 pc

Error