Master Vapor Pump 6CFM
Double click for enlarge
SKU: MVP-100

Master Vapor Pump 6CFM

Availability: In stock 5 Items
$ 12,000.00


Finally the pump the industry has been waiting for. Capable of recovering over 1 pound of vapor per minute. Decrease production times, increase your profits! Electric diaphragm pump for hydrocarbon solvent extraction processing.  Built in the US on Patented Technology to meet the needs of large scale extraction systems. The MVP-6CFM is 3rd party certifiable with your system, UL listed and FDA compliant. The pump uses no oil or grease thus there is no chance of contaminating the product. Capable of Continuous 100% Duty Cycle (24/7 Runtime, won’t overheat). Maintain and repair the pump with easy DIY diaphragm changing and internal cleaning as needed. One year manufacturer's warranty on defect or workmanship.

Master Vapor Pumps MVP-6CFM Vapor Recovery Pump is designed for hydrocarbon extraction processing. The Dual-Diaphragm pump is electrically powered by an explosion-proof motor. It is built with stainless steel wetted parts and has a max allowable working pressure of 350 PSI. Eeach unit is certified and made in the USA. 

Performance Factoids:

  • Recover LP-Gas vapor at over 6CFM (cubic feet per minute)
  • Recover butane at up to 1 LB/Min (pounds per minute)
  • Recover and recondense butane at over 12 GPH (gallons per hour)
  • Maximum pumping outlet pressure: 60 PSI (4.1 bar) continuous, 70 PSI (4.8 bar) intermittent
  • Maximum pumping inlet vacuum produced: 27 InHg (0.91 bar)
  • Maximum pumping speed: 190 CPM (cycles per minute)
  • Pump static withstand pressure rating: MAWP 350 PSI (24 bar)
  • Materials: pressure section: stainless steel; diaphragms: FKM; reed valves: stainless steel
  • Optional PTFE diaphragms kit available
  • Process gas temperature range: FKM -40-275F (-40-135C); PTFE +40-220F (4-104C)
  • Recommended FKM replacement schedule: every 1000 hours running time
  • Air temperature range for motor/gearbox operation: 32-104F(0-40C)

Pump Head Charge:

  • Motor is coupled to diaphragms with patented gas pressure charged chamber
  • Pumping outlet pressure runs about 10 PSI lower than the charge gas pressure level
  • Non-reactive CO2 gas is used to charge the pump head
  • CO2 gas is safer than air for driving the pump
  • CO2 gas is non-flammable and non-explosive with LPG (should a diaphragm ever leak)
  • CO2 gas regulator with gauges is provided with pump assembly
  • CO2 tank is operator provided (cannot ship filled tanks) - from any welding supply store
  • Pump charge gas supply: standard (#20) 5 LB tank of industrail CO2
  • Typical CO2 gas usage: <0.2 SCFH (very little); estimated life of charge gas tank: 1 year
  • Pump charge gas pressure range: continuous 5 to 70 PSI (1.4 to 5.5 bar); to 80 PSI intermittent

Electrical and Mechanical:

  • Electric motor: explosion proof for C1D1 hazardous areas; rated Class I Gr C & D, Class II Gr F&G
  • Electric motor: 1 HP, 1800 RPM, 60 Hz
  • Motor option: Model MVP-6CFM-1PH: Single-phase: 115/208-230V, 13.4/6.7 FLA (full load amps)
  • Motor option: Model MVP-6CFM-3PH: Three-phase: 208-230/460V, 3.3/1.65 FLA, Inverter-rated
  • Pump Speed: 190 CPM (cycles per minute) at 60 Hz
  • Noise: sound pressure measured 1 meter from pump: 80.5 dBa
  • Porting: process inlet and outlet: 1/2" JIC-male
  • Added ports for optional pressure gauges: inlet and outlet: 1/4" FNPT
  • Inlet & outlet ports at ideal equipment connections heights 46" and 41" above floor
  • Size: 17.0" x 19.9" x 46" tall; minimum use of valuable floor space
  • Weight: 182.5 lb (82.8 kg)

Operating Manual:

Motors & Wiring:

More from this collection

(0) Items
Items 0
Subtotal $ 0.00
To Top